Meie tooted

Sirvige meie toodete kataloogi

MiRICi-E1/T1


MANAGEMENT AND SECURITY

The unit can be monitored, configured, and tested using the following ports and applications:

  • Out-of-band via the I2C channel (off the SFP edge connector)
  • Inband via the Ethernet port using a Web browser.

MiRICi-E1T1 sends SNMP traps for up to eight management stations.

To facilitate integration of a new device into an IP network, if no IP address has been manually configured, MiRICi-E1T1 automatically requests one from the DHCP server upon booting.

 

 

OPERATION AND MAINTENANCE

File Operations

Application software can be downloaded to MIRICi-E1/T1 via the central server, using TFTP.

Configuration Adapter

An optional configuration adapter module, SFP-CA, is available for configuring MiRICi-E1T1 by connecting it to a PC via a USB port.
The configuration adapter is used for preliminary configuration, such as assigning an IP address for first use or specifying the operation mode. It is also used to download software to the MiRICi-E1T1 units.

 

Feature MiRICi-E3/T3 MiRICi-E1/T1
Protocol type GFP (G.8040, G.7041/Y.1303)
RAD HDLC
cHDLC
GFP (G.8040, G.7041/Y.1303)
RAD HDLC
cHDLC
Framing G.832, G.751, unframed(E3)
C-bit, M23, unframed (T3)
G.732.N, G.732.N CRC, unframed(E1)
ESF, D4, unframed (T1)
QoS VLAN priority (802.1p, strict priority, WRR) VLAN priority (802.1p, strict priority, WRR)
Loop detection Yes (LAN or WAN) Yes (LAN or WAN)
Fault propagation Fault propagation Yes (LOS, FDL, LOF, AIS, RDI)
SNMP traps Yes, up to 8 management stations Yes, up to 8 management stations

 


Muud tooted

RICi-16

Connects Fast Ethernet LANs transparently over TDM infrastructure

RIC-LC

Ethernet Converter for Bonded PDH Circuits

ETX-1

Provide Ethernet connectivity services for business applications

ETX-2

Provide Ethernet connectivity services for business applications

ETX-5

Provide Ethernet connectivity services for business applications

MiNID

Based on a powerful FPGA